6" ConFlat Flange with 0.75" I.D Feedthrough & Quick Connector for DIY Sputtering Coater - EQ-FT-CF6

6" ConFlat Flange with 0.75" I.D Feedthrough & Quick Connector for DIY Sputtering Coater - EQ-FT-CF6This is a 6'' O. D conflated flange with a universal type high vacuum feedthrough (0. 75" ID and 1" OD) installed. It is compatible with MTI or other brand sputtering heads with 3 4" rod at related products below. Specifications: Material 304 Stainless Steel Structure Standard 6" CF flange with a central hole. 1'' through hole flange, 16 unthreaded bolt holes, bolt hole diameter 0. 33''. Please click the Pic1 & 2 for details. High Vacuum Feedthrough

5 mm Material SiC Note If you need a larger quantity for resale

energy saving

Operation Manual

Net weight:                     21g

The Professional series diamond blades last longer and will cut faster than ordinary notched-rim or plated-diamond blades

<5°C/min at 1200°C<T<1700°C Max Temperature Gradient <100°C/in Warranty No warranty Application Notes MTI recommends using alumina crucibles for samples to extend the service life of the tube and avoid cross-contamination

( You may use CIP to press again to increase density by about 5 - 10%

The magnetic fluid sealed inline swivel prevents gas/vacuum / electrical lines twisting in the event of the KF50 flange rotation

current-time curve

Tubes have been evacuated to 10-7 Torr at room temperature

Operation Video &  Instruction                           Application Notes The ability to generate aligned fibers and the degree of alignment depends on the polymer-solvent combination

Various types of samples can be placed in a plurality of vacuum storage tanks and placed directly in the glove box (pic 3 and pic 4)